| Consulting engineers for water & Air Pollution Control |
| |
|
Regulatory guidance in the field of Pollution Control. |
 |
|
Environmental Audits/ Statement Reports. |
 |
|
Obtaining consents (Establish, Operate, Renewal & Amendment) for various industries. |
 |
|
To provide all assistance in liasoning work. |
 |
|
Preparation of Environmental status Report |
|
| |
| Environmental clearance/ Environmental Impact Assessment Studies |
| |
|
Carrying out Environmental Impact Assessment studies. |
 |
|
Obtaining Environmental Clearance from Department of Environment (State, Central Govt. and MoEf). |
|
| |
| Turnkey Contractor for ETP |
| |
|
Detailed engineering pollution control plants |
 |
|
Design, fabrication, erection and commissioning on Turnkey basis of air and water pollution control equofipments/plants. |
 |
|
Effluent Treatment Plant (ETP) |
 |
|
Sewage Treatment Plant (STP) |
 |
|
Water Treatment Plant (WTP) |
 |
|
Recycling of sewage and industrial effluent |
 |
|
Upgradation of ETP/ STP |
 |
|
Bio-mass development in secondary treatment system for ETP/ STP |
 |
|
Operation and Maintenance of ETP/ STP |
 |
|
Preparation of Feasibility Report for ETP/ STP |
|
| Top |
Chemical Supply |
| |
|
Activated Charcoal/ Carbon as filter media |
 |
|
Sand, Gravels as filter media |
 |
|
Resins |
 |
|
Polyelectrolyte |
 |
|
Lime, Alum (All Lab Solution) |
|
| Top |
| Manufacturers/ Supply of Pollution Control Equipments |
| |
|
Detailed engineering pollution control plants |
 |
|
Surface Aerators/ Floating Aerators |
 |
|
Agitators |
 |
|
Clariflocculators and Clarifiers |
 |
|
Effluent Transfer Pumps/ High Pressure Pumps |
 |
|
Internal Piping (in ETP/ STP) |
 |
|
Air Dryers |
 |
|
Filter Press |
 |
|
Incinerator |
 |
|
Design and development of incineration system on analyzing & studying the available data & waste to be incinerated. |
|
| |
| Top |
|
Water and Waste Water Analyst |
| |
|
Tretability studies of waste effluents. |
 |
|
Water Analysis (Municipal, River, Borewell etc.) |
 |
|
Wastewater Analysis |
 |
|
Heavy Metal Testing |
 |
|
Stack Monitoring |
 |
|
Ambient Air Monitoring |
 |
|
Noise Monitoring |
 |
|
Solid Waste Analysis |
|
| |
| |
| Laboratory Equipments : |
| Top |
| |
SR. NO. |
PARTICULARS |
| |
|
1 |
Atomic Absorption Spectrophotometer* |
2 |
Autoclave , (Electrical) complete stainless steel, size: 12” dia x ht.3.0 K.W |
3 |
Digital Incubator, (Temperature range 37 to 600C) size: 14”x14”x14” , inner chamber stainless steel |
4 |
Digital colony counter |
5 |
EC-TDS Analyser*, CM183 Model |
6 |
COD Digestion apparatus , Model 2015 D |
7 |
COD titrator , Model CT-15 |
8 |
Accessories COD Digesters |
9 |
Citizen Brand Analytical Balance With built in motorized calibration Capacity 220 gm, Accuracy 0.1 mg, Model Cx220 |
10 |
Water Still (water distillation unit), Mane sty type capacity: 4 litres, Opening type condenser |
11 |
Distillation water apparatus (6 ltrs capacity) |
12 |
Compound Microscope |
13 |
pH meter |
14 |
Lab scale oven |
15 |
Mini spectrophotometer |
16 |
Nephlometer |
17 |
Hot Plate |
18 |
Noise Level Meter* , Model SL-4010 |
19 |
Stack Monitoring Kit |
20 |
Muffle furnace* |
21 |
Lab scale surface aerator |
22 |
High volume sampler for SPM&RSPM monitoring in Ambient air |
23 |
Anemometer Digital for weather Analysis(wind direction and speed) |
24 |
All types of necessary Glassware’s for Air, water and microbiological testing |
25 |
All types of chemicals for Air, water and microbiological testing |
26 |
Exhaust fans (2) |
27 |
Acetylene gas cylinder for AAS |
|
| |
| Top |